1. Home Page
  2. Live Analysis
  3. Connect Camera via USB

Connect Camera via USB

You can connect a thermal camera that supports radiometric infrared-video streaming to the PC via USB. After connecting the camera, you can perform operations such as live view, image capturing, and temperature measurement.

Prepare for Streaming

  1. Connect the camera to a USB port of your PC with supplied USB cable. Keep the camera ON.

  2. Select USB Cast Screen in camera pop-up menu.

    Note

    • For camera of early firmware version, turn on USB cast screen from setting menu (see user manual of your camera). Otherwise, streaming may fail.

    • It is recommended to connect with USB 3.0 port and cable if your PC and device support the function. Comparing to USB 2.0, USB 3.0 allows higher frame rate settings to ensure smoother streaming for certain high IR resolution model. If your camera supports USB 3.0, follow the prompts on client to change USB port.

Start Streaming on Client

  1. In the top-left corner, click > USB Connection.

  2. Click Select Device to view detected device list. Click Refresh and wait if no device is detected.

  3. Select a device and click Connect to start live view.

    Note

    During live view, if you switch to other tabs, choose Background to keep streaming in background.

  4. Click Disconnect to stop live view.

Note

  • The client is able to detect multiple USB devices, but only streams from one device at a time.

  • If one device is streaming, avoid plugging/unplugging other USB terminals on the PC.

  • Avoid refreshing the device list frequently.

Previous Page
Next Page
Was this page helpful?
On This Page
  • Prepare for Streaming
  • Start Streaming on Client